Troubleshooting Wavlink Extender Keeps Rebooting Issue
If you've stumbled onto this post, it's probably because the frequent reboots of your Wavlink WiFi range extender are driving you crazy. But there's no need for alarm! If you immediately implement the solutions we've outlined below, the problem should be resolved. Continue reading!
Reasons: Wavlink Extender Keeps Rebooting
From insufficient electricity to an incomplete Wavlink setup process, there are a number of potential causes for your Wavlink extender's repeated restarts. Several of the more prevalent and significant ones are shown here. Keep on reading!
- Your Wavlink range extender has out-of-date firmware.
- There is insufficient current reaching your Wavlink gadget.
- Problematic or loosely connected cables.
- Apparently, the Wavlink extender in your possession has become too hot to operate.
- Your Wavlink range extender isn't set up correctly.
- Either your WiFi devices are too far apart or too close together.
So long! These were some of the most widespread, fundamental causes of the problem. Let's take this problem-solving a step further now. To see more, please scroll down.
Troubleshoot: Wavlink Extender Keeps Restarting
Update the Firmware
Keep in mind that if your Wavlink extender isn't functioning as it should, out-of-date software might be at blame. Therefore, it is strongly suggested that you immediately upgrade the firmware on your Wavlink extender. What you should do is this:
- Connect your Wavlink extender to a functional electrical socket.
- Start up a computer or laptop after you're done.
- Use the wifi.wavlink.com web address to go to the Wavlink extender's configuration page. Take note that the IP address can also be used to upgrade the firmware of a Wavlink extender.
- After you have successfully signed in, go to your settings and choose the Firmware Update option.
- Please proceed as instructed.
Verify whether your Wavlink extender continues to reboot after you've updated the firmware. If you answered yes, try the following suggested solution.
2. Check Power Outlet
It's possible that the wall outlet isn't providing enough electricity to your Wavlink WiFi range extender. Solve the problem once and for all by double-checking the wall outlet into which the range extender is inserted. It can't be messed with or altered in any way. Make sure the Ethernet cable you used to link your Wavlink range extender and router is in good shape.
Log in to your Wavlink extender via the wifi.wavlink.com login window to verify the Ethernet connection has been created successfully.
3. Remove WiFi Leeches
For many people, this is the root cause of their Wavlink extender's ongoing rebooting problem. For this reason, to resolve the issue and maximize your extender's WiFi capabilities, you should remove any unfamiliar devices from your Wavlink wireless range extender. As a result, you will be able to solve the problem with the reboots.
4. Reset Your Extender
What, none of the aforementioned troubleshooting steps helped you stop the Wavlink extender from repeatedly rebooting? You need not worry. In this scenario, reverting your Wavlink WiFi range extender to its original settings is strongly advised.
How to Factory Reset a Wavlink Range Extender?
- Make sure your Wavlink range extender has enough electricity. Don't forget to disconnect the home router from your extender, however (if connected).
- When you're finished, push the extender's Reset button and leave it pressed for a few seconds.
- After a brief period of flickering, the LEDs on your extender will become steady.
Don't forget to reconfigure your Wavlink range extender once you've reset it. You may do this by accessing your extender over the web at wifi.wavlink.com or ap.setup and reaching the Wavlink WiFi extender login window. For your perusal, the Wavlink extender setup can also be done by employing the WPS method.
Verdict
Constant reboots of a Wavlink WiFi range extender can be a pain in the head. Thankfully, you can fix the problem by trying the hacks discussed in this post. If this article has helped you get rid of your extender’s random reboots, drop a thumbs up in the comments section.
Read more: Uncut Guide to Resolve Wifi.wavlink.com Not Working Issue
.jpg)
